Stander

Bathtub Security Pole & Grab Bar

$269.99

1120-W
Available In Store And By Shipping
+ -

Product description

The Bathtub Security Pole is a versatile and easy-to-install grab bar that provides enhanced support and stability to prevent falls in the bathroom. With a rotating and lockable grab bar, height adjustability, and compatibility with standard bathtubs, this non-permanent solution is ideal for anyone who needs added support while bathing or using the toilet.

2-In-1 Ladder Grab Bar and Transfer Pole

Prevent falls and injuries in the bathroom with the two-in-one grab bar and transfer pole. Use the ladder-like grab bar to lift yourself up from a toilet, bath bench, or over the bathtub rim and balance yourself with the transfer pole. The Bathtub Security Pole and Curve Grab Bar secures with tension and has been designed to support lateral weights up to 300 pounds!


Grab Bar Swivels 360 Degrees

The Curved Grab Bar swivels around the pole a full 360 degrees by simply pulling on the knob. For added measures of safety, the swiveling grab bar automatically locks itself into place in eight different spots every 45 degrees. The curved grab bars adds additional versatility to the Security Pole. By adding multiple points and angles of use, the Security Pole can be installed in a bathroom to be used with both a bathtub and a toilet!

Grab Bar Swivels 360 Degrees

The Curved Grab Bar swivels around the pole a full 360 degrees by simply pulling on the knob. For added measures of safety, the swiveling grab bar automatically locks itself into place in eight different spots every 45 degrees. The curved grab bars adds additional versatility to the Security Pole. By adding multiple points and angles of use, the Security Pole can be installed in a bathroom to be used with both a bathtub and a toilet!

Easily Installs on Most Alcove Bathtubs

The Bathtub Security Pole assembles and installs within minutes using the provided clamp and wrench. To install, clamp the pole to the bathtub rim and tighten the pole using the wrench to create tension between the tub rim and ceiling. No drilling or hardware needed!

The bathtub grab bar is compatible with most standard alcove bathtubs with flat sides. It securely clamps to tub rims 3 to 7 inches wide and 13 to 21 inches wide.

Use with Two Shower Curtains

To ensure water is contained, the bathtub bar should be used with two shower curtains, one on either side of the Security Pole. The Bathtub Security Pole works with both straight and curved curtain rods. Curtains rods should be installed on the outside of the Security Pole.

Clamps to Tub Wall

Secure in place by securing the clamp to the tub wall and tightening the pole to the ceiling with the included wrench

Clamps to Tub Wall

Secure in place by securing the clamp to the tub wall and tightening the pole to the ceiling with the included wrench

Fits Ceilings 7′-9′

Includes everything needed for installation on a 7 to 9 foot flat dry-walled ceiling

Rotates and Locks

Swivel the Curved Grab Bar a full 360 degrees; grab bar automatically locks into place every 45 degrees


Specifications

  • Fits Ceiling Heights: 7-9 feet
  • Weight Capacity: 300 lbs
  • Fits Bathtub Widths: 3-7 inches
  • Fits Bathtub Heights: 13-21 inches
  • Length of Top I-Beam: 22″
  • Width of Top I-Beam: 9″
  • Diameter of Pole: 1.5″