The Pride Mobility Cell Phone Holder (ACC2200941) is the official RAM® X-Grip® phone mount accessory for Pride mobility scooters and power chairs, including the Go Go® Super Portable (SC15M) and i-Go™ folding scooter. Spring-loaded rubber-coated grip arms hold your phone securely on bumpy surfaces without damage to the device. The articulating mount adjusts angle so you can position the screen for clear visibility while riding. It mounts to either side of the tiller, fits phones from 1.875" to 3.25" wide and 2.25" to 4.25" tall, and is made in the United States by RAM Mounts. Listed as a supported optional accessory in Pride's official Go Go Super Portable brochure — like the cup holder and mirrors, it must be removed before using the travel bag bundle.
The RAM X-Grip is an industry-standard phone mounting system used across motorcycles, marine applications, and medical equipment. The X-Grip design uses four spring-loaded rubber-coated arms that grip the corners of the phone rather than clamping the sides — this keeps the phone stable on vibrating or uneven surfaces while the rubber coating prevents scratches. The articulating ball-and-socket mount underneath allows you to dial in the viewing angle so the screen faces you correctly regardless of where on the tiller it's mounted. It can be set on either the left or right side of the tiller depending on which hand you use for your phone. The spring tension accommodates phones from slim budget models up to larger devices within the 3.25" maximum width. Made in the USA, it's the same mount system Pride uses across multiple scooter and power chair lines. About phone fit and sizing →
ACC2200941 is confirmed compatible with the following Pride models per Pride's official gear store: Go Go® Super Portable (SC15M), i-Go™, Go Go® Elite Traveller, Go Go® Elite Traveller 2, Go Go® LX 3-Wheel, Go Go® Sport, Go Go® Endurance Li, Victory® 9, Victory® 10, Victory® 10.2, Victory® LX Sport, Zero Turn 8, Zero Turn 10, Revo® 2, Pursuit® 2, and PX4. Pride notes accessories may also be compatible with additional models — check your product manual or contact Broadway Home Medical with your model and serial number before ordering.
| Part Number | ACC2200941 |
|---|---|
| Description | RAM® X-Grip® Cell Phone Holder Assembly |
| Phone Width — Min | 1.875" |
| Phone Width — Max | 3.25" |
| Phone Height — Min | 2.25" |
| Phone Height — Max | 4.25" |
| Mount Type | Articulating ball-and-socket — adjustable angle |
| Side Specific | No — mounts left or right |
| Country of Origin | USA (RAM Mounts) |
| Travel Bag Compatibility | Must be removed before using Go Go® Travel Bag Bundle |
| Manufacturer | Pride Mobility Products Corp. — Duryea, Pennsylvania |
Common questions about this accessory from customers at Broadway Home Medical.
The holder fits phones between 1.875" and 3.25" wide and 2.25" and 4.25" tall. Most standard smartphones — including phones in cases — fall within this range. Very large phones like the iPhone Pro Max or Samsung Galaxy Ultra may approach the maximum width limit depending on the case. If your phone is at the edge of the range, bring it to Broadway Home Medical to check fit before purchasing.
RAM Mounts is a US manufacturer of mounting hardware used across motorcycles, boats, aircraft, and medical equipment. The X-Grip design grips the four corners of the phone with spring-loaded rubber-coated arms rather than clamping the sides — this keeps the phone secure on vibrating surfaces without scratching the device. The articulating ball mount underneath lets you rotate and tilt the phone to any viewing angle. Pride selected the RAM X-Grip as the phone holder for this accessory line because of its proven reliability and universal phone compatibility.
The holder mounts to the tiller of compatible scooters and can be positioned on either the left or right side depending on your preference. Pride provides a dedicated phone holder installation instruction sheet available from the i-Go™ manuals page at pridemobility.com. The articulating mount allows you to adjust the viewing angle after installation without removing the holder from the tiller.
Yes — Pride's official brochure lists the cell phone holder as one of the accessories that must be removed before using the Go Go® Travel Bag Bundle (KIT2405932). Along with the armrests and rear view mirrors, it needs to come off before the scooter will fit correctly into the main bag.
Confirmed compatible models include the Go Go® Super Portable (SC15M), i-Go™, Go Go® Elite Traveller, Go Go® Elite Traveller 2, Go Go® LX 3-Wheel, Go Go® Sport, Go Go® Endurance Li, Victory® 9, Victory® 10, Victory® 10.2, Victory® LX Sport, Zero Turn 8, Zero Turn 10, Revo® 2, Pursuit® 2, and PX4. The holder may also fit additional Pride models — check your product manual or contact Broadway Home Medical to confirm compatibility for your specific scooter.
ACC2200941 is available through Broadway Home Medical. Stop by either of our Wichita locations or give us a call to confirm availability and compatibility with your scooter model before ordering.
Compatibility confirmed for models listed above per Pride's official gear store. This part may also be compatible with additional Pride models — consult your product manual or contact your provider to verify. Must be removed before using Go Go® Travel Bag Bundle (KIT2405932). Pride Mobility Products Corp. reserves the right to alter specifications without prior notice.
