The Pride Mobility Rearview Mirror (LGTRMIR1003) is a screw-in OEM mirror accessory for Pride power scooters with a delta tiller. At 102mm (approximately 4") in diameter and threaded M8 × 1.25T, it installs directly into the tiller stem without tools beyond hand-tightening and works on either the left or right side. It's listed under the accessories for the Go Go® Super Portable, i-Go™, Victory® 10, Pursuit, and several other Pride scooter models. Backing up, checking cross-traffic, and navigating sidewalks without straining your neck are the practical reasons most customers add it — and it's one of the least expensive meaningful safety upgrades for any compatible scooter. Also listed under alternate part number ACC134496.
Most mobility scooter users have limited torso rotation — turning to check behind you while moving isn't always possible or safe. Parking lots, sidewalks, store aisles, and outdoor paths all involve situations where knowing what's behind you reduces risk. The rearview mirror mounts at eye level on the tiller so you can check your rear view with a glance rather than a turn. Pride specifically calls this out for crossing busy streets, driving on sidewalks, and navigating parking lots. The 102mm mirror provides a wide enough field of view to see pedestrians and vehicles approaching from behind without needing to stop. Installation is straightforward — the mirror threads directly into the M8 hole on the tiller stem of any compatible Pride scooter with a delta tiller. Installation details →
LGTRMIR1003 is confirmed compatible with a wide range of Pride scooter models that use a delta tiller with an M8 tiller stem thread. Confirmed models include the Go Go® Super Portable (SC15M), i-Go™ (S20/SL6), Victory® 10 (S610/S710), Pursuit (S713), Pursuit XL (S714), Pursuit Sport (MV714), Victory LX Sport (S710LXW), Victory Sport (S710DXW), BAJA® Wrangler® 2 (BA400/SK2), and others listed in Pride's accessories documentation. Pride notes this part may also be compatible with products not listed — check your product manual or contact Broadway Home Medical with your serial number to confirm before ordering.
| Part Number | LGTRMIR1003 (also listed as ACC134496) |
|---|---|
| Description | Mirror, M8 × 1.25T, 102mm Dia, Rear View, Screw-In, Lens |
| Mirror Diameter | 102mm (approx. 4") |
| Thread Type | M8 × 1.25T (screw-in) |
| Mount Location | Tiller stem — delta tiller |
| Side Specific | No — fits left or right side |
| Unit of Measure | Each (EA) |
| Manufacturer | Pride Mobility Products Corp. — Duryea, Pennsylvania |
Common questions about this accessory from customers at Broadway Home Medical.
The mirror threads directly into the M8 × 1.25T hole on the tiller stem of a compatible Pride scooter — no tools required beyond hand-tightening. It can be installed on either the left or right side of the tiller. The tiller must have an M8 threaded stem port, which is standard on Pride scooters with a delta tiller configuration.
Confirmed compatible models include the Go Go® Super Portable (SC15M), i-Go™ (S20/SL6), Victory® 10 (S610/S710), Pursuit (S713), Pursuit XL (S714), Pursuit Sport (MV714), Victory LX Sport (S710LXW), Victory Sport (S710DXW), and BAJA® Wrangler® 2 (BA400/SK2). The mirror fits any Pride scooter with a delta tiller and an M8 stem thread. Pride notes it may also fit additional models not listed — check your product manual or provide your serial number when ordering through Broadway Home Medical.
LGTRMIR1003 is sold as an individual unit (one mirror). Many Pride scooters have two M8 ports on the tiller — one on each side — so two units are needed for a pair. Some scooter models ship from the factory with one mirror already installed on the right side, in which case a single LGTRMIR1003 completes the pair on the left.
Yes — ACC134496 is an alternate part number for the same mirror assembly. Both refer to the same OEM Pride Mobility screw-in rearview mirror with 102mm lens and M8 × 1.25T thread.
Yes. LGTRMIR1003 is an OEM part manufactured by Pride Mobility Products Corp. It is the same mirror Pride supplies as a factory accessory on models that come equipped with a mirror, and the same part listed on Pride's official accessories pages for compatible scooter models.
LGTRMIR1003 is available through Broadway Home Medical. Stop by either of our Wichita locations or call us to confirm availability and compatibility with your specific scooter model before ordering.
Compatibility confirmed for Pride scooter models with M8 × 1.25T delta tiller stem. This part may also be compatible with additional Pride models not listed — consult your product manual or contact your provider to verify. Pride Mobility Products Corp. reserves the right to alter specifications without prior notice. Note: part number is sometimes listed as LGRTRMIR1003 due to a common transposition — the correct Pride part number is LGTRMIR1003.
